Top 3 Ways to Change DNS Server on Windows 11

By default, Windows uses the DNS servers that your Wi-Fi router or local network uses. However, if the DNS servers are slow and unreliable, you may want to switch to a better and faster DNS server on Windows 11.

Fortunately, changing DNS servers on Windows is relatively quick and painless. In this post, we will guide you through 3 different ways to change DNS server on Windows 11. Let’s get started.

When should you change it

Under ideal circumstances, you would not need to change the DNS server on Windows. However, if you experience unusually slow internet speeds and errors like DNS server not responding, it is a good idea to switch to public DNS servers on Windows 11.

Moreover, using the default DNS server also threatens your privacy because your Internet Service Provider (ISP) may be logging your browsing history.

So, if you are looking for better internet speed or want to protect your privacy, then changing the DNS servers would be a good idea. Cloudflare, OpenDNS, and Google are some of the best options for switching to a free public DNS server.

1. Change the DNS server using the Settings app

Windows 11 gives you access to all your important settings with the new and improved Settings app, unlike previous iterations. Here’s how to use it to change the DNS server on your computer.

Step 1: Press Windows key + I on your keyboard to launch the Settings app.

Step 2: Go to the Network and Internet tab on your left.

Step 3: Click on your current Internet connection type, Wi-Fi or Ethernet.

The fourth step: Go to hardware properties.

Fifth step: Click the Edit button next to Set DNS Server.

Sixth step: In the Edit DNS Settings window, use the dropdown menu to select Manual.

Seventh step: Turn on the IPv4 or IPv6 setting, depending on the type of IP connection you wish to modify.

Step 8: We will be using Google’s public DNS servers. So you can enter in the preferred DNS field and in the alternate DNS field.

Alternatively, you can use the drop-down menu to enable DNS over HTTPS to improve privacy and security.

Step 9: Click the Save button to apply the changes.

That’s about it. You will find the specific DNS server under Wi-Fi properties.

2. Change the DNS server using the Control Panel

If you prefer the old school method, you can also use the Control Panel to change the DNS servers on your computer. Here’s how to do it.

Step 1: Click the search icon in the taskbar, and type control Board, Select the first result that appears.

Step 2: Use the dropdown menu in the upper right corner to change the display type to large or small icons.

Step 3: Go to Network and Sharing Center.

The fourth step: Click Change adapter settings on your left.

Fifth step: Right-click on your internet connection and select Properties.

Sixth step: Under Networks, double-click “Internet Protocol Version 4 (TCP/IPv4)” to open its properties.

Seventh step: Select the “Use the following DNS server addresses” option. Enter the primary and secondary DNS addresses in the Preferred DNS server and Alternate DNS server fields, respectively.

Step 8: Check the “Verify settings on exit” box and click OK.

And you are fine. Windows will start using the selected DNS settings immediately.

3. Change DNS Server Using Command Prompt

If you are a power user who is familiar with the Command Prompt tool on Windows, you can run a few commands to change the DNS server on your computer. Here’s how.

Step 1: Press Windows Key + S to open Windows Search. write in poultice and click Run as administrator.

Step 2: In the console, type the following command and press Enter.

netsh interface show interface

Step 3: Make a note of the name of your current network connection.

The fourth step: Run the following command to set up the primary DNS server.

netsh interface ip set dns name="AdapterName" source="static" address="X.X.X.X"

Replace AdapterName in the above command with the network connection name listed in step 3. Replace XXXX with the actual address of the DNS server you wish to use.

Fifth step: Similarly, run the following command to set up an alternate DNS server.

netsh interface ip add dns name="ADAPTER-NAME" addr="X.X.X.X" index=2

Again, replace AdapterName in the above command with the actual name of your network connection. Replace XXXX with the secondary address.

You can confirm the change to the DNS server by viewing your current network configuration. To do this, run the following command.

ipconfig /all

It’s time to switch

Changing the DNS servers is something that you may have to do when you encounter Internet connection issues on your computer. It’s good to see how Windows offers several different ways to make this change.

Leave a Comment

Your email address will not be published.