How to Fix Windows Can’t Install On This Disk Error

Reinstalling Windows can be a time-consuming and hurried process. Some people might get lucky and not receive a single error message in the process, while others will need to fix some issues.

Although a lot of errors can occur, there are a few “Windows cannot be installed to disk” messages which are more common than others.

Fortunately, there are ways to fix these issues and continue installing Windows. Whether you’re trying to move Windows to a freshly installed SSD or have partition style issues, we can help you find the solutions.

Windows cannot be installed on this GPT disk

The error “The specified disk has a GPT partition pattern” appears because your computer was designed to be set up in Basic Input/Output System or BIOS mode.

But the hard disk you’re trying to install Windows on is partitioned in GPT, which runs on the Unified Extensible Firmware Interface, or UEFI.

The only way to solve this problem is to convert the GUID partition table or GPT disk to the MBR master boot record. Here’s what you should do:

  1. When you see the error “The selected disk has a GPT partition style” on your screen, open the Command Prompt.
  2. Entry “diskpartcommand and press Enter.
  3. write the “list diskcommand and press Enter again.
  4. He writes “select disk #and press Enter. Make sure to replace “#” with the number of the GPT partition style disk.
  5. He writes “clean“and press Enter followed by”convert mbr“And enter.

Windows cannot be installed on this MBR disk

Many users encounter “The selected disk is of MBR partition style” when they try to install Windows 10, 8 or 7.

It happens when you try to set up Windows in UEFI, but your hard drive is not set up to support it. Essentially, the selected disk contains GPT instead of the MBR partition style.

The good news is that you can change the UEFI boot configuration by going into the BIOS. Here’s how:

  1. Restart the computer and start BIOS mode. Note that the process may vary by manufacturer, but “Delete + F10” is the standard abbreviation.
  2. Go to “Boot Devices” in BIOS and select the boot order that changes the DVD drive from UEFI to Legacy Mode.
  3. Make sure to save changes and exit BIOS.
  4. Restart your computer and try the Windows installation process again.

Windows cannot be installed on this SSD

If you have a brand new Solid State Drive (SSD) on your computer, moving Windows will definitely improve speed and performance.

But you may encounter a situation where the BIOS or Windows Setup does not recognize the SSD. The first course of action should be to check the cable connection to the SSD.

You may need to replace the Advanced Technology Serial Attachment or SATA cable used with the SSD. It is also important to check if the SATA port is enabled, which you can check manually by going into the BIOS mode, console, and drive details.

However, if the problem persists, you will need to use the Command Prompt function to fix the problem. Here’s how:

  1. Launch Command Prompt by searching for it in the main Windows toolbar.
  2. He writes “diskpartfollowed by the Enter key.
  3. Enters “list disk #and replace the disc number, then press Enter.
  4. Enters “clean alland press Enter again.
  5. He writes “exitClose the command prompt.
  6. Go back to Windows setup.

Don’t forget to backup any valuable information from your SSD before undergoing this process, as it will erase any data you have on it.

Windows cannot be installed on this disk, and the disk may fail soon

If you are trying to reinstall Windows 10 or 11 to ensure better performance, upgrade the system, or get rid of malware, you may encounter a strange error.

A pop-up may appear telling you that “Windows cannot be installed to this disk. The disk may fail soon. The error will prompt you to consider another disk to install Windows, but there is a way around this issue.

You can try to solve this problem by using the Windows CHKDSK (Check Disk) utility. It is designed to detect and solve errors. The process is straightforward, and these are the steps to follow:

  1. Go to the search bar on the desktop and type “CHKDSK. “
  2. Right-click on the results and select “Run Ads Administrator”.

You can also perform the same check using Command Prompt by running it and entering “CHKDSK. “

Windows cannot be installed on this NTFS disk

Some users have encountered the error “Windows must be installed on an NTFS partition” when trying to install Windows to a specific location.

This means that your boot partition is not set up correctly, and you may need to convert some old file systems to new technology file system or NTFS drives.

As with many other partition style issues, the most effective solution is to use DiskPart Manager. In this particular case, this procedure requires the following steps:

  1. Open a command prompt and type “diskpartand press Enter.
  2. He writes “select disk #Press Enter and type “list partitionand press Enter.
  3. He writes “select partition #followed by the enter key.
  4. He writes “format fs=ntfs quickand press the Enter key to start the file system conversion.

Windows cannot be installed on this disk 0x803

“Error 0x80300024” is something many Windows users encounter when installing a newer version of the operating system.

Again, this issue indicates a partition style or volume issue. However, it is also necessary to check if your computer has the minimum requirements in terms of hardware and can indeed support Windows upgrade. If this is not a problem, you can try several other solutions.

This error can be caused by other hard drives connected to your computer. They can interfere with the Windows installation process, so be sure to unplug them.

Also, a fresh Windows installation using any of the USB ports on your computer might be the root of the problem. Try each USB port to eliminate the possibility that one of the ports is causing the problem.

Finally, the hard disk partition may contain some corrupt data, which prevents the installation of Windows. The only solution there is to format the disk where you want to install Windows.

It is a simple enough process, but you will need to backup any data on the disk – otherwise, it will be permanently lost. If you really want to clear or save the data, here’s what you need to do:

  1. Right-click on the disk to which the Windows installation will be moved.
  2. Select the Format option and confirm.
  3. Select the Next option when formatting the disk to continue installing Windows.

Windows installation without problems

If you’ve ever tried to reinstall your current version of Windows or install a new one, you probably know that the errors aren’t unusual. However, it can be frustrating trying to figure out what went wrong and how to fix it.

Fortunately, the most common problems are relatively easy to fix by going into BIOS mode or using commands at the Command Prompt. Sometimes this is a hardware issue, and you’ll need to check USB ports, cables, and even format the disk to clear any corrupt files.

Have you ever encountered an error while installing Windows? Let us know in the comments section below.

Leave a Comment

Your email address will not be published.